Diagnostic tool DK-5DK-5 is designed to diagnose vehicle electronic
DK-5 supports the following electronic control units:
|Electronic Control Unit||Engine|
|50.3763||YMZ-6562.10, 6563.10, 6581.10, 6582.10 released before June 2010|
|М230Е3||YMZ-6562.10, 6563.10, 6581.10, 6582.10 released after June 2010|
|М240||YMZ-6565, 6565Х, 6585, 6585Х, 6566Х, 6586Х|
|MS 6.1||KAMAZ 740.6Х Euro-3|
|EDC7||MMZ-D245.ХЕЗ, MMZ-D245.ХЕ4, MMZ-S3A, YMZ-650, YMZ-651, YMZ-652, YMZ-530, KAMAZ 740.7Х|
|EDC17||MMZ-D245.7Е4, MMZ-S3B, MMZ-S4, YMZ-530 (Euro-5)|
|SCR Emitec||YMZ, MMZ, KAMAZ|
|Diagnostic by CAN SAE J1939||YMZ, MMZ, Cummins and others.|
Communication with electronic control units is implemented via K-Line, CAN interfaces.
By connecting computer with the USB-port to the vehicle diagnostic connector DK-5 provides monitoring, system parameters adjustment, system diagnostics. EDCDiags software runs under MS Windows 2000/XP/Vista/7/8.
DK-5 is designed as a cable adapter that provides a connection between the vehicle diagnostic connector (OBD-II) and the computer USB-port (Type A).
After installing DK-5 driver, the device is identified as a virtual COM-port by the operating system.
|Saving of engine parameters to the file|
|Reading and deleting faults from the ECU memory|
|Diagnostic report output|
|Engine electronic systems functional tests|
|Adjusting the ECU calibration parameters|
|Flashing (updating ECU firmware)|
|Diagnostic tool DK-5||360 EUR|
|DK-5.3724003||OBD-II MTZ adapter||MTZ tractors (emission standard S3b, S4) EDC-17 ECU flashing (firmware updating)||12 EUR|
|DK-5.3724009||OBD-II-16pF - Deutsch 9pM adapter||Connection to Cummins ECU||24 EUR|